Resin

Epoxy Resin---Mold Sticking or Demolding Challenges

Epoxy Resin---Mold Sticking or Demolding Challenges

Issue:
Resin may stick to the mold after curing, making demolding difficult and potentially damaging the mold.

Solutions:
Use a Mold Release Agent: Apply a mold release agent on the mold surface for easier demolding.
Choose Silicone Molds: Silicone molds offer greater flexibility, making the demolding process smoother.
Allow Full Curing Before Demolding: Wait until the resin has completely cured (typically 24-48 hours) before attempting to demold.

Previous
Epoxy Resin---Uneven Coloration Issue
Next
Epoxy Resin---Uneven Surface or Pitting