This Platinum Silicones cure at room temperature with negligible shrinkage. With different hardnesses to choose from, This products offer tremendous versatility and are suitable for making production molds of any configuration, large or small. These silicones exhibit good chemical, abrasion and heat resistance. Materials such as plasters, concrete, wax, low-melt metal alloys or resins (urethane, epoxy or polyester) can then be cast into these silicone rubbers without a release agent.
Highly Concentrate Non Toxic 1A:1B Silicone Rubber Mold Making for Artwork
Regular price
$68.10 USD
Sale price
$68.10 USD
Regular price
Unit price
-
Estimated Delivery:Apr 17 - Apr 21
-
Free Shipping & Returns: USA/Canada/Australia/UK: Orders over 25KG can be shipped by Door to Door Sea. (There is a shipping discount.)
Highly Concentrate Non Toxic 1A:1B Silicone Rubber Mold Making for Artwork
Product description
What is Silicone Rubber ？
|
TECHNICAL OVERVIEW
|
|
|
Mix Ratio
|
1A:1B by volume
|
|
Pot Life
|
25mins
|
|
Cure Time - 25℃
|
4hours
|
|
Mixed Viscosity
|
3000pcs
|
|
Shore D Hardness
|
45A
|
|
Color
|
Transparent White
|
|
Tensile Strength
|
700 psi
|
|
Specific Gravity
|
1.24g/cc
|
|
*All values measured after 7 days at 73°F/23°C Shrinkage*(in./in.): < .001
|
|
Safe instruction
Keep Out of Reach of Children
Be careful. Use only with adequate ventilation. Contact with skin and eyes may cause irritation.
Be careful. Use only with adequate ventilation. Contact with skin and eyes may cause irritation.
Flush eyes with water for 15 minutes and seek immediate medical attention. Remove from skin with waterless hand cleaner followed by soap and water.
Storage instruction
Hermetical and stored in a dry place at 70°F/21°C.
