Silicone Series

Before pouring, apply a layer of petroleum jelly to the silicone mold. Alternatively, when demolding,...

This material has high viscosity, making the finished products quite sticky and soft. You can...

March 03, 2025

1.Weather is too cool. 2.Mixing part A&B with wrong ratio(not 1:1) 3.Used too much silicon...

February 10, 2025

Required tools: PET gloves / silicone putty Step 1: Take equal amounts of Component A...

January 09, 2025

Uneven Surface or Pitting Issue: The surface of cured resin may be uneven, with pits or...

January 07, 2025

Issue:Resin may stick to the mold after curing, making demolding difficult and potentially damaging the...